Working principle: automatic flushing equipment has two modes: automatic operation and manual operation.

Standby state: Turn the 3P breaker in the control box of the automatic flushing device to the ON position, the working indicator light is on, and the system starts to enter the standby state.

Flushing operation: The vehicle slowly passes through the automatic flushing equipment chassis at a speed of 3km/hour, and the infrared sensor senses the vehicle after the water pump starts.

The working water flows through the nozzles of the nozzles on both sides and the nozzle holes of the chassis to automatically flush the front, back, left, right and bottom of the vehicle body in multiple directions. About 40s (time 060s adjustable) The pump stops automatically and the flushing is completed. The use of the United States advanced infrared electronic eye, automatic induction of the vehicle, compared to the ordinary trip switch failure rate is 90%.

System composition: The automatic flushing equipment system adopts the non-contact technology to carry out all-dimensional three-dimensional cleaning of the vehicle body, which can realize flushing the chassis and no contact flushing on both sides of the vehicle. The system consists of a washing machine chassis, a grid plate (iron tweezers), left and right side nozzles (including nozzles), a control box and a water pump.